Security Features
313
Permitted Values
0-user
1-var
2-admin
Default 0
[1]
If you change this parameter, the phone will reboot to make the change take effect.
Auto Logout Time
Auto logout time defines how long to log out the web user interface automatically when you do not perform any
actions on web user interface. Once logging out, you must re-enter username and password for web access authen-
tication.
Topic
Auto Logout Time Configuration
Auto Logout Time Configuration
The following table lists the parameter you can use to configure the auto logout time.
Parameter features.relog_offtime <y0000000000xx>.cfg
Description It configures the timeout interval (in minutes) for web access authentication.
Permitted Values Integer from 1 to 1000
Default 5
Web UI Features->General Information->Auto Logout Time(1~1000min)
Phone Lock
You can lock the IP phone to prevent it from unauthorized use. Once the IP phone is locked, anyone must enter the
password to unlock it.
Yealink phones offer two types to lock the phone:
l Long press the pound key when the IP phone is idle (not applicable to CP960 phones)
l Tap the phone lock key (if configured) when the IP phone is idle.
You can set a waiting time to lock the phone automatically. If the waiting time is set to 0, the phone will not be auto-
matically locked. You need to lock the phone manually.
Note
The Volume key, HEADSET key and Speakerphone key are always available when you lock the phone.
Topics
Operation Behaviors on Lock Phone
Phone Lock Configuration
To Next Page
Loading...
Need help?
General
