Yealink T5 Series Administrator's Guide

Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
288
Default 0
Web UI Features->General Information->Dual Headset
Acoustic Clarity Technology
To optimize the audio quality of your network, Yealink phones support the acoustic clarity technology: Acoustic Echo
Cancellation (AEC), Background Noise Suppression (BNS), Automatic Gain Control (AGC), Voice Activity Detection
(VAD), Comfort Noise Generation (CNG) and jitter buffer.
Topics
Acoustic Echo Cancellation (AEC)
Noise Suppression
Background Noise Suppression (BNS)
Automatic Gain Control (AGC)
Voice Activity Detection (VAD)
Comfort Noise Generation (CNG)
Jitter Buffer
Smart Noise Block
Acoustic Shield
Acoustic Echo Cancellation (AEC)
Yealink phones employ advanced AEC for hands-free operation. You can configure the AEC feature to remove the echo
of the local loudspeaker from the local microphone without removing the near-end speech.
AEC is not normally required for calls via the handset. In some cases, where echo is experienced by the remote party,
AEC may be used to reduce/avoid echo when you use the handset.
Note
Utilizing acoustic echo cancellation will introduce a small increase of delay into an audio path which might cause a lower
voice quality.
Topic
AEC Configuration
AEC Configuration
The following table lists the parameter you can use to configure AEC.
Parameter voice.echo_cancellation <y0000000000xx>.cfg
Description It enables or disables the AEC (Acoustic Echo Canceller) feature.
Permitted
Values
0-Disabled
1-Enabled
Default 1
Web UI Settings->Voice->Echo Cancellation->ECHO

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English