Yealink T5 Series Administrator's Guide

Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
348
Permitted
Values
0-Disabled
1-Enabled
Default 0
Web UI Features->Call Pickup->Audio Alert for BLF Pickup
Parameter features.blf_pickup_only_send_code <y0000000000xx>.cfg
Description
It enables or disables the phone to only dial out feature access code of directed pick up when per-
forming BLF/BLF list pickup.
Permitted
Values
0-Disabled, the phone will dial out feature access code of directed pick up plus monitored number
when performing BLF/BLF list pickup.
1-Enabled, the phone will only dial out feature access code of directed pick up when performing BLF
pickup.
Default 0
[1]
X is the account ID. For T58V/T58A/T56A, X=1-16; for CP960, X=1.
LED Mode for BLF/BLF List Key
BLF LED Mode provides five kinds of definition for the BLF/BLF List key LED status. BLF LED mode is only applicable to
the expansion module EXP50 connected to T58V/T58A/T56A phones.
Topics
Supported BLF LED Modes
BLF LED Mode Configuration
Supported BLF LED Modes
The following table lists the LED statuses of the BLF/BLF list key when BLF LED Mode is set to 0, 1, 2, 3 or 4 respectively.
The default value of BLF LED mode is 0.
Expansion Module Key LED (configured as a BLF key or a BLF List key and BLF LED Mode is set to 0)
LED Status Description
Solid green The monitored user is idle.
Fast-flashing red
(200ms)
The monitored user receives an incoming call.
Solid red
The monitored user is dialing.
The monitored user is talking.
The monitored user’s conversation is placed on hold (This LED status requires server sup-
port).
Slow-flashing red (1s) The call is parked against the monitored user’s phone number.
Off The monitored user does not exist.
Expansion Module Key LED (configured as a BLF key or a BLF List key and BLF LED Mode is set to 1)
LED Status
Description
Fast-flashing red
(200ms)
The monitored user receives an incoming call.

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English