Call Features
225
Off hook hot line dialing feature is configurable on a per-line basis and depends on support from a SIP server. The
server actions may vary from different servers.
It is also applicable to the IP call and intercom call.
Note
Off hook hot line dialing feature limits the call-out permission of this account and disables the hotline feature. For
example, when the phone goes off-hook using the account with this feature enabled, the configured hotline number will
not be dialed out automatically.
Topic
Off Hook Hot Line Dialing Configuration
Off Hook Hot Line Dialing Configuration
The following table lists the parameters you can use to configure off hook hot line dialing.
Parameter
account.X.auto_dial_enable
[1]
<MAC>.cfg
Description
It enables or disables the phone to first dial out a pre-configured number when a user lifts the handset,
presses the Speakerphone key or taps desired line key, dials out a call using account X.
Note: Handset and Speakerphone key are not applicable to CP960 phones.
Permitted
Values
0-Disabled
1-Enabled, the phone will first dial out the pre-configured number (configured by the parameter “accoun-
t.X.auto_dial_num”).
Default 0
Parameter
account.X.auto_dial_num
[1]
<MAC>.cfg
Description
It configures the number that the IP phone first dials out when a user lifts the handset, presses the Speak-
erphone key or taps desired line key, dials out a call using account X.
Note: It works only if “account.X.auto_dial_enable” is set to 1 (Enabled).
Note: Handset and Speakerphone key are not applicable to CP960 phones.
Permitted
Values
String within 1024 characters
Default Blank
[1]
X is the account ID. For T58V/T58A/T56A, X=1-16; for CP960, X=1.
Live Dialpad
Live Dialpad allows the phones to automatically dial out the entered phone number without tapping the send key after
a designated period of time.
Topic
Live Dialpad Configuration
Live Dialpad Configuration
The following table lists the parameters you can use to configure live dialpad.
To Next Page
Loading...
Need help?
General
