Yealink T5 Series Administrator's Guide

Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
428
Permitted
Values
0-Disabled
1-Enabled
Default 0
Parameter bw.voice_mail.visual.display_videomail.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to display the video mails in the voice mail list.
Note: It works only if "bw.xsi.enable" and "bw.voice_mail.visual.enable" are set to 1 (Enabled). It is not
applicable to CP960 phones.
Permitted
Values
0-Disabled
1-Enabled
Default 0
Parameter voice_mail.message_key.mode <y0000000000xx>.cfg
Description
It configures the phone behavior when pressing the MESSAGE key when the IP phone is idle.
Note: It is not applicable to CP960 phones.
Permitted
Values
0-enter the Set Voice Mail Code screen if the voice mail access code has not been configured; dial out the
voice mail access code if the voice mail access code has been configured.
1-enter the View Voice Mail screen
Default 0
Broadsoft SCA
Parameter
account.X.share_line.barge_in.enable
[1]
<MAC>.cfg
Description It enables or disables the users to interrupt/barge into an active call on the shared line.
Permitted
Values
0-Disabled
1-Enabled
Default 1
Parameter
account.X.shared_line_one_touch_bargein.enable
[1]
<MAC>.cfg
Description
It enables or disables the phone to barge in the call between remote shared line party and the third party
bytapping the line key.
Permitted
Values
0-Disabled
1-Enabled
Default 0
Parameter
account.X.shared_line_one_touch_retrieve.enable
[1]
<MAC>.cfg
Description
It enables or disables the phone to retrieve the public held call on remote shared line party phone by tap-
ping the line key.
Permitted
Values
0-Disabled
1-Enabled
Default 1
[1]
X is the account ID. For T58V/T58A/T56A, X=1-16; for CP960, X=1.

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English