Yealink T5 Series Administrator's Guide

Phone Provisioning
69
If it is set to a specific value less than starting time configured by the parameter “static.auto_pro-
vision.weekly.begin_time”, the phone performs auto provisioning at random between the starting time on
that day and ending time in the next day.
Note: It works only if “static.auto_provision.flexible.enable” is set to 1 (On).
Permitted
Values
Time from 00:00 to 23:59
Default Blank
Web UI Settings->Auto Provision->Flexible Time
Parameter static.auto_provision.prompt.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to prompt you for the configuration update and the result (if any con-
figuration changes) during auto provisioning.
Note: If the phone performs auto provisioning when receiving a SIP NOTIFY message which contains the
header “Event: check-sync”, the phone will display the prompt message no matter whether the con-
figuration is updated.
Permitted
Values
0-Disabled
1-Enabled
Default 0
Parameter static.auto_provision.connect.keep_alive <y0000000000xx>.cfg
Description It enables or disables the long connection for downloading files via auto provisioning.
Permitted
Values
0-Disabled, the phone uses the short connection for downloading files via auto provisioning
1-Enabled
Default 0
Parameter custom.auto_provision.save_rps_info.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to save the entered user name and password when performing RPS (Redir-
ection and provisioning server) update for auto provisioning.
Permitted
Values
0-Disabled
1-Enabled
Default 1
Parameter static.auto_provision.authentication.expired_time <y0000000000xx>.cfg
Description
It configures the timeout (in seconds) after which the authentication pop-up box for auto provisioning
disappears.
Permitted
Values
0-The authentication pop-up box does not disappear from the phone screen automatically.
Integer from 10 to 86400 -The authentication pop-up box automatically disappears from the phone
screen after the designated time.
Default 7200
[1]
If you change this parameter, the phone will reboot to make the change take effect.
User-Triggered Provisioning Settings Configuration
You can enable the users to trigger phones to perform provisioning by dialing an activation code. This method works
only if there is no registered account on the phone.

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English