Yealink T5 Series Administrator's Guide

Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
128
After provisioning, you can tap the line key 1 to hold calls without notifying other phones registered with the shared
line, the shared line displays active to others shared line. It is only applicable to Shared Line Appearance.
Example: Setting a Line Key as Multicast Paging key
The following example shows the configuration for a Multicast Paging key.
Example
linekey.1.type = 24
linekey.1.value = 224.5.6.20:10008
linekey.1.label = Sales
linekey.1.extension = 2
After provisioning, you can tap the line key 1 to send announcements quickly to the Sales group.
Example: Setting a Line Key as Open Door Key
The following example shows the configuration for an open door key.
Example
linekey.1.type = 304
linekey.1.value = http://192.168.1.1/api/switch/ctrl?switch=1&action=trigger
linekey.1.label = Door Phone1
linekey.1.extension = 1048
After provision, you can tap the line key 1 to open the door at any time.
Example: Setting a Line Key as Video Monitoring Key
The following example shows the configuration for an open door key.
Example
linekey.1.type = 305
linekey.1.value = http://192.168.1.1/mjpg/video.mjpg
linekey.1.label = Door Phone2
linekey.1.extension = 1048
After provision, you can tap the line key 1 to check the camera video at any time.
Programmable Keys
You can customize programmable keys on the phone to enable users to access frequently used functions, or, if your
phone does not have a particular hard key, you can create a soft key. For example, if the phone does not have a Do Not
Disturb hard key, you can create a Do Not Disturb soft key.
The programmable key takes effect only when the IP phone is idle.
The following shows the custom soft keys displayed on the phone:
For CP960:

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English