Yealink T5 Series Administrator's Guide

Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
64
Yealink phones can obtain the provisioning server address during startup. Then the phones first download boot files
and configuration files from the provisioning server, and then resolve and update the configurations written in con-
figuration files. This entire process is called auto provisioning. For more information on auto provisioning, refer to
Yealink_SIP_IP_Phones_Auto_Provisioning_Guide.
The phones can be configured to upload log files (log files provide a history of phone events), call log files and contact
files to the provisioning server. You can also configure a directory for each of these three files respectively.
Topics
Auto Provisioning Settings Configuration
User-Triggered Provisioning Settings Configuration
Auto Provisioning Settings Configuration
The following table lists the parameters you can use to configure settings for auto provisioning.
Parameter static.auto_provision.attempt_expired_time <y0000000000xx>.cfg
Description
It configures the timeout (in seconds) to transfer a file via auto provisioning.
Note: It has a higher priority than the value defined by the parameter “static.network.attempt_expired_
time”.
Permitted
Values
Integer from 1 to 300

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English