Phone Customization
107
You can configure what contact information presents and how to display the contact information. If the contact exists
in the phone directory, the phone displays the saved contact name and number. If not, it will use Calling Line Iden-
tification Presentation (CLIP) or Connected Line Identification Presentation (COLP) to display the contact’s identity.
Topic
Call Display Configuration
Call Display Configuration
The following table lists the parameters you can use to configure call display.
Parameter
account.X.picture_info_enable
[1]
<MAC>.cfg
Description
It enables or disables the phone to download the picture from the URL contained in the Call-Info or
Caller-Image header of INVITE message.
Permitted
Values
0-Disabled
1-Enabled
Default 0
Parameter phone_setting.called_party_info_display.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to display the local identity when it receives an incoming call.
Note: The information display method is configured by the parameter “phone_setting.call_info_display_
method”.
Permitted
Values
0-Disabled
1-Enabled
Default 0
Web UI Settings->Call Display->Display Called Party Information
Parameter phone_setting.call_info_display_method <y0000000000xx>.cfg
Description
It configures the call information display method when the phone receives an incoming call, dials an out-
going call or is during a call.
Permitted
Values
0-Name+Number
1-Number+Name
2-Name
To Next Page
Loading...
Need help?
General
