Yealink T5 Series Administrator's Guide

Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
108
3-Number
4-Full Contact Info (display name<sip:xxx@domain.com>)
Default 0
Web UI Settings->Call Display->Call Information Display Method
Parameter
account.X.update_ack_while_dialing
[1]
<MAC>.cfg
Description It enables or disables the phone to update the display of call ID according to the ACK message.
Permitted
Values
0-Disabled
1-Enabled
Default 0
Parameter
sip.disp_incall_to_info
[2]
<y0000000000xx>.cfg
Description
It enables or disables the phone to display the identity contained in the To field of the INVITE message
when it receives an incoming call.
Permitted
Values
0-Disabled
1-Enabled
Default 0
[1]
X is the account ID. For T58V/T58A/T56A, X=1-16; for CP960, X=1.
[2]
If you change this parameter, the phone will reboot to make the change take effect.
Display Method on Dialing
When the phone is on the pre-dialing or dialing screen, the account information will be displayed on the phone
screen.
Yealink phones support three display methods: Label, Display Name and User Name. You can customize the account
information to be displayed on the IP phone as required.
Topic
Display Method on Dialing Configuration
Display Method on Dialing Configuration
The following table lists the parameters you can use to configure display method on dialing.

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English