Yealink T5 Series Administrator's Guide

Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
144
The following table lists the parameters you can use to configure EDK.
Parameter features.enhanced_dss_keys.enable <y0000000000xx>.cfg
Description
It enables or disables the Enhanced DSS Keys (EDK) feature.
Note: It is not applicable to CP960 phones.
Permitted
Values
0-Disabled
1-Enabled
Default 0
Parameter edk.id_mode.enable <y0000000000xx>.cfg
Description
It enables or disables to view the menu item ID by long pressing the Volume Up key for three seconds on
any screen.
Note: The menu item ID is displayed on the status bar of the phone. Long pressing the Volume Up key
again for three seconds to exit. It works only if “features.enhanced_dss_keys.enable” is set to 1 (Enabled).
It is not applicable to CP960 phones.
Permitted
Values
0-Disabled
1-Enabled
Default 0
EDK List Configuration
Using the Enhanced DSS Keys (EDK) List parameters to define a macro is useful when defining more than one soft key
or DSS key.
The following table lists the parameters you can use to configure EDK list.
Parameter
edk.edklist.X.enable
[1]
<y0000000000xx>.cfg
Description
It enables or disables Enhanced DSS Keys (EDK) macro X.
Note: It works only if “features.enhanced_dss_keys.enable” is set to 1 (Enabled). It is not applicable to
CP960 phones.
Permitted
Values
0-Disabled
1-Enabled

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English