EasyManua.ls Logo

Yealink T5 Series

Yealink T5 Series
472 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Administrators Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
40
Rport feature depends on support from a SIP server.
The following table lists the parameter you can use to configure rport.
Parameter
account.X.nat.rport
[1]
<MAC>.cfg
Description
It enables or disables the phone to add the "rport" parameter with no value in the Via header of its
requests.
Permitted
Values
0-Disabled
1-Enabled, the INVITE Contact header uses the port in the "rport" parameter, but does not use the source
IP address in the "received" parameter in the Via header of server's response.
2-Enable Direct Process, the INVITE Contact header uses the port in the "rport" parameter, and uses the
source IP address in the "received" parameter in the Via header of server's response.
Default 0
Web UI Account->Advanced->RPort
[1]
X is the account ID. For T58V/T58A/T56A, X=1-16; for CP960, X=1.
SIP Port and TLS Port Configuration
You can configure the SIP and TLS source ports on the phone. Otherwise, the phone uses default values (5060 for
UDP/TCP and 5061 for TLS).
If NAT is disabled, the port number shows in the Via and Contact SIP headers of SIP messages. If NAT is enabled, the
phone uses the NAT port number (and NAT IP address) in the Via and Contact SIP headers of SIP messages, but still
using the configured source port.
The following table lists the parameters you can use to configure SIP port and TLS port.
Parameter sip.listen_port <y0000000000xx>.cfg
Description
It specifies the local SIP port.
If it is set to 0, the phone will automatically listen to the local SIP port.
Permitted
Values
0, Integer from 1024 to 65535
Default 5060
Web UI Settings->SIP->Local SIP Port
Parameter sip.tls_listen_port <y0000000000xx>.cfg
Description
It specifies the local TLS listen port.
If it is set to 0, the phone will not listen to the TLS service.
Permitted
Values
0, Integer from 1024 to 65535
Default 5061
Web UI Settings->SIP->TLS SIP Port

Table of Contents

Other manuals for Yealink T5 Series

Related product manuals