Yealink T5 Series Administrator's Guide

Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
50
RPC Method Description
l Configuration File
l Log File
ScheduleInform
This method is used to request the CPE to schedule a one-time Inform method call (separate
from its periodic Inform method calls) sometime in the future.
FactoryReset This method resets the CPE to its factory default state.
TransferComplete
This method informs the ACS of the completion (either successful or unsuccessful) of a file
transfer initiated by an earlier Download or Upload method call.
AddObject This method is used to add a new instance of an object defined on the CPE.
DeleteObject This method is used to remove a particular instance of an object.
TR-069 Configuration
The following table lists the parameters you can use to configure TR-069.
Parameter static.managementserver.enable <y0000000000xx>.cfg
Description It enables or disables the TR-069 feature.
Permitted
Values
0-Disabled
1-Enabled
Default 0
Web UI Settings->TR069->Enable TR069
Parameter static.managementserver.username <y0000000000xx>.cfg
Description
It configures the TR-069 ACS server user name used to authenticate the phone.
Leave it blank if no authentication is required.
Permitted
Values
String within 128 characters
Default Blank
Web UI Settings->TR069->ACS Username
Parameter static.managementserver.password <y0000000000xx>.cfg
Description
It configures the TR-069 ACS server password used to authenticate the phone.
Leave it blank if no authentication is required.
Permitted
Values
String within 64 characters
Default Blank
Web UI Settings->TR069->ACS Password
Parameter static.managementserver.url <y0000000000xx>.cfg
Description
It configures the access URL of the TR-069 ACS server.
Note: The phones also support obtaining the URL of the ACS by detecting DHCP option 43.
Permitted
Values
URL within 511 characters

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English