Yealink T5 Series Administrator's Guide

Call Features
229
Default Blank
Web UI Features->General Information->PswPrefix
Parameter features.password_dial.length <y0000000000xx>.cfg
Description
It configures how many digits to be displayed as asterisks.
Example:
features.password_dial.length = 3
If set the prefix to 12 and the length to 3, when you want to dial the number 123456, the entered number
is displayed as 12***6 on the phone screen.
Note: It works only if “features.password_dial.enable” is set to 1 (Enabled).
Permitted
Values
Integer from 0 to 32
Default Blank
Web UI Features->General Information->PswLength
Call Timeout
Call timeout defines a specific period of time after which the phone will cancel the dialing if the call is not answered.
Topic
Call Timeout Configuration
Call Timeout Configuration
The following table lists the parameter you can use to configure call timeout.
Parameter phone_setting.ringback_timeout <y0000000000xx>.cfg
Description
It configures the duration time (in seconds) in the ringback state.
If it is set to 180, the phone will cancel the dialing if the call is not answered after 180 seconds.
Permitted
Values
Integer from 0 to 3600
Default 180
Anonymous Call
Anonymous call allows the caller to conceal the identity information shown to the callee. The callee’s phone touch
screen prompts an incoming call from anonymity.
Anonymous calls can be performed locally or on the server. When performing anonymous call on local, the phone
sends an INVITE request with a call source " From: "Anonymous" sip:anonymous@anonymous.invalid ”. If performing
Anonymous call on a specific server, you may need to configure anonymous call on code and off code to activate and
deactivate server-side anonymous call feature.
Topic
Anonymous Call Configuration

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English