Yealink T5 Series Administrator's Guide

Phone Customization
119
Phone UI Settings->Basic Settings->Bluetooth->Bluetooth (On) ->Edit My Device Information->Device Name
Parameter
bluetooth.connect_confirm.enable
[1]
<y0000000000xx>.cfg
Description
It enables or disables the phone to prompt users to confirm the reconnection request from the Bluetooth
device.
Note: It is only applicable to CP960 phones.
Permitted
Values
0-Disabled
1-Enabled, the prompt window will not appear during the call. After the call, users can tap the request
notification message from the notification center, and then select to accept or reject the connection
request.
Default 0
Parameter
bluetooth.a2dp_sink
[1]
<y0000000000xx>.cfg
Description
It enables or disables the phone to act as the connected Bluetooth-enabled mobile phone player.
Note: It is only applicable to CP960 phones.
Permitted
Values
0-Disabled, the Media audio item is hidden on the connected Bluetooth-enabled mobile phone.
1-Enabled, you need to enable the Media audio feature manually after the Bluetooth-enabled mobile
phone is paired and connected. Enable the Media audio feature via phone user interface at the path:
Bluetooth->Bluetooth (On)-> ->Media audio.
2-Enabled, the phone automatically acts as the Bluetooth-enabled mobile phone player after you pair
and connect the Bluetooth-enabled mobile phone to the phone successfully.
Default 1
[1]
If you change this parameter, the phone will reboot to make the change take effect.
Handset/Headset/Speakerphone Mode
The T58V/T58A/T56A phones support three ways to place/answer a call: using the handset, using the headset or using
the speakerphone. It is not applicable to CP960 phones.
Topic
Handset/Headset/Speakerphone Mode Configuration
Handset/Headset/Speakerphone Mode Configuration
The following table lists the parameters you can use to configure handset/headset/speakerphone mode.
Parameter features.group_listen_in_talking_enable <y0000000000xx>.cfg
Description
It enables or disables the phone to enter into the group listening mode by pressing the Speakerphone key
when you first answer the call using the handset.
Note: The audio is sent only through the handset. So you are able to speak and listen through the hand-
set, but you can only listen through the speaker. It is not applicable to CP960 phones.
Permitted
Values
0-Disabled
1-Enabled
Default 1

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English