Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
358
Event Description
UnHeld When a held call is resumed.
Mute When the IP phone mutes a call.
UnMute When the IP phone un-mutes a call.
Missed Call When the IP phone misses a call.
IP Changed When the IP address of the IP phone changes.
Idle To Busy When the state of the IP phone changes from idle to busy.
Busy To Idle When the state of phone changes from busy to idle.
Reject Incoming Call When the IP phone rejects an incoming call.
Answer New-In Call When the IP phone answers a new call.
Transfer Failed When the IP phone fails to transfer a call.
Transfer Finished When the IP phone completes transferring a call.
Forward Incoming Call When the IP phone forwards an incoming call.
Autop Finish When the IP phone completes auto provisioning via power on.
Open Call Waiting When the IP phone enables the call waiting.
Close Call Waiting When the IP phone disables the call waiting.
Headset When the IP phone presses the HEADSET key.
Handfree When the IP phone presses the Speakerphone key.
Cancel Call Out When the phone cancels an outgoing call in the ring-back state.
Remote Busy When an outgoing call is rejected.
Call Remote Canceled When the remote party cancels the outgoing call in the ringing state.
Variable Values List
The following table lists predefined variable values.
Variable Value Description
$mac The MAC address of the IP phone.
$ip The IP address of the IP phone.
$model The IP phone model.
$firmware The firmware version of the IP phone.
$active_url
The SIP URI of the current account when the IP phone places a call, receives an incoming call or estab-
lishes a call.
$active_user
The user part of the SIP URI for the current account when the IP phone places a call, receives an incom-
ing call or establishes a call.
$active_host
The host part of the SIP URI for the current account when the IP phone places a call, receives an incom-
To Next Page
Loading...
Need help?
General
