Yealink T5 Series Administrator's Guide

Configuration Parameters
417
If it is set to other values (for example, 4), the entered number less than 4 digits would not match with the
BroadCloud contact.
Example:
If there is a BroadCloud Buddy name “Sunmy” with phone number “785656” and the parameter “fea-
tures.uc_dir.match_tail_number” is set to “4”, “5656”, “85656” or “785656” would match “Sunmy (785656)”.
“656”, “56” or “6” would not match “Sunmy (785656)”.
Note: It is not applicable to CP960 phones.
Permitted
Values
Integer greater than or equal to 0
Default 4
Parameter search_in_dialing.bw_uc_buddies.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to automatically search entries from the BroadSoft Buddies directory, and
display results on the pre-dialing/dialing screen.
Note: It is not applicable to CP960 phones.
Permitted
Values
0-Disabled
1-Enabled
Default 0
Parameter search_in_dialing.bw_uc_buddies.priority <y0000000000xx>.cfg
Description
It configures the search priority of the BroadSoft Buddies directory.
Note: It is not applicable to CP960 phones.
Permitted
Values
Integer greater than or equal to 0
Default 6
Parameter directory_setting.bw_uc_buddies.enable <y0000000000xx>.cfg
Description
It enables or disables the users to access the BroadSoft Buddies directory by pressing the Directory/Dir
soft key.
Note: It is not applicable to CP960 phones.
Permitted
Values
0-Disabled
1-Enabled
Default 0
Parameter directory_setting.bw_uc_buddies.priority <y0000000000xx>.cfg
Description
It configures the display priority of the BroadSoft Buddies directory.
Note: It is not applicable to CP960 phones.
Permitted
Values
Integer greater than or equal to 0
Default 12
[1]
If you change this parameter, the phone will reboot to make the change take effect.
Broadsoft XSI
Parameter
account.X.xsi.user
[1]
<MAC>.cfg

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English