Yealink T5 Series Administrator's Guide

Configuration Parameters
423
Description It configures the flexible seating PIN.
Permitted
Values
String
Default Blank
[1]
X is the account ID. For T58V/T58A/T56A, X=1-16; for CP960, X=1.
[2]
Hoteling feature may also need to configure this parameter, refer to Broadsoft Hoteling for more information.
Related Topic
Securely Storing the LDAP Credentials
Broadsoft Call Decline
Parameter
account.X.features.call_decline.enable
[1]
<MAC>.cfg
Description
It enables or disables call decline feature.
Note: It is not applicable to CP960 phones.
Permitted
Values
0-Disabled
1-Enabled
Default Blank
Parameter features.call_decline.enable <y0000000000xx>.cfg
Description
It enables or disables call decline feature for the IP phone.
Note: It is not applicable to CP960 phones.
Permitted
Values
0-Disabled
1-Enabled
Default 0
[1]
X is the account ID. For T58V/T58A/T56A, X=1-16.
Broadsoft Network Directory
Parameter bw.xsi.directory.enable <y0000000000xx>.cfg
Description
It enables or disables the network directory feature for the IP phone.
Note: It works only if “bw.xsi.enable" is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default 0
Parameter bw_phonebook.group_enable <y0000000000xx>.cfg
Description
It enables or disables the phone to display the group directory.
0-Disabled
1-Enabled
Note: Except CP960 IP phones, it works only if "bw.xsi.enable" and "bw.xsi.directory.enable" are set to 1
(Enabled).
Permitted
0-Disabled

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English