Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
126
Note
In FAC call park mode, the Park/Retrieve key invokes the call park code/park retrieve code by default. Therefore, the phone
dials out *684603 to park a call, and dials out *884603 to retrieve a call. If these codes are not set, you can assign code and
extension to “linekey.X.value”, for example, “*684603”.
Example: Set a Park/Retrieve Key for Transfer Call Park Mode
Scenario Conditions Related Topic
features.call_park.park_mode = 2
Call Park and Retrieve
features.call_park.line_restriction.enable = 1
Example
######Set a Park key######
linekey.1.type = 10
linekey.1.value =*01
linekey.1.line = 1
linekey.1.label =Bill
######Set a Retrieve key####
linekey.3.type = 56
linekey.3.line = 1
linekey.3.value =*11
linekey.3.label =Retrieve Bill
After provisioning, you can easily tap the Park key (line key 1) to park a call to the specific shared parking lot (*01) dur-
ing a call, and tap the Retrieve key (line key 3) to retrieve the parked call from the shared parking lot (*01) using the
retrieve code (*11). You can only perform call park feature on the specific line (line 1).
If the “features.call_park.line_restriction.enable” is set to 0 (Disabled), the phone will park/retrieve the call to the server
on the current line in use.
Note
In Transfer call park mode, if you press the Park key when the phone is idle, the Park key will invoke the call park code.
Therefore, you can use a Park key to park and retrieve a call. In this case, you need to assign the park retrieve code (*11) to
“features.call_park.park_code”. When you tap the Park key again on idle screen, the phone will dial out “*11*01” to retrieve
the parked call.
Example: Setting a Line Key as Directed Pickup key
Scenario Conditions Related Topic
account.1.direct_pickup_code = *97
or
features.pickup.direct_pickup_code = *97
Directed Call Pickup
Example
linekey.1.type = 9
To Next Page
Loading...
Need help?
General
