Yealink T5 Series Administrator's Guide

Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
254
Note: It works only if “features.fwd.allow” is set to 1 (Enabled) and “features.fwd_mode” is set to 1 (Cus-
tom). It is not applicable to CP960 phones.
Permitted
Values
Integer from 0 to 20 (determined by “features.forward.no_answer.show_ring_times”)
Default 2
Web UI Features->Forward&DND->Forward->AccountX->No Answer Forward->After Ring Time(0~120s)
Phone UI Settings->Features->Call Forward->AccountX->No Answer Forward->After Ring Time
Parameter
account.X.timeout_fwd.on_code
[1]
<MAC>.cfg
Description
It configures the no answer forward on code to activate the server-side no answer forward feature.
The phone will send the no answer forward on code and the pre-configured destination number (con-
figured by the parameter “account.X.timeout_fwd.target”) to the server when you activate no answer for-
ward feature on the phone.
Note: It works only if “features.fwd.allow” is set to 1 (Enabled) and “features.fwd_mode” is set to 1 (Cus-
tom). It is not applicable to CP960 phones。
Permitted
Values
String within 32 characters
Default Blank
Web UI Features->Forward&DND->Forward->AccountX->No Answer Forward->On Code
Phone UI Settings->Features->Call Forward->AccountX->No Answer Forward->On Code
Parameter
account.X.timeout_fwd.off_code
[1]
<MAC>.cfg
Description
It configures the no answer forward off code to deactivate the server-side no answer forward feature.
The phone will send the no answer forward off code to the server when you deactivate no answer forward
feature on the phone.
Note: It works only if “features.fwd.allow” is set to 1 (Enabled) and “features.fwd_mode” is set to 1 (Cus-
tom). It is not applicable to CP960 phones.
Permitted
Values
String within 32 characters
Default Blank
Web UI Features->Forward&DND->Forward->AccountX->No Answer Forward->Off Code
Phone UI Settings->Features->Call Forward->AccountX->No Answer Forward->Off Code
[1]
X is the account ID. For T58V/T58A/T56A, X=1-16.
Call Forward Synchronization for Server-side Configuration
Call forward synchronization feature provides the capability to synchronize the status of the call forward features
between the IP phone and the server.
If the call forward is activated in phone mode, the forward status changing locally will be synchronized to all registered
accounts on the server; but if the forward status of the specific account is changed on the server, the forward status
locally will be changed.
The following table lists the parameters you can use to configure call forward synchronization for server-side.

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English