EasyManuals Logo

Yealink T5 Series Administrator's Guide

Yealink T5 Series
472 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #338 background imageLoading...
Page #338 background image
Administrators Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
332
Tip
You can set a DSS key as a Directed Pickup key, and specify a contact you want to pick up a call from for this key. For more
information, refer to DSS Keys.
The following table lists the parameters you can use to configure directed call pickup.
Parameter features.pickup.direct_pickup_enable <y0000000000xx>.cfg
Description It enables or disables the user to use DPickup soft key when performing directed call pickup feature.
Permitted
Values
0-Disabled
1-Enabled, the phone will display the DPickup soft key on the Dialing screen.
Default 0
Web UI Features->Pick up & Park->Directed Call Pickup
Parameter features.pickup.direct_pickup_code <y0000000000xx>.cfg
Description
It configures the directed call pickup code on a phone basis.
Note: The directed call pickup code configured on a per-line basis (account.X.direct_pickup_code)
takes precedence over that configured on a phone basis (features.pickup.direct_pickup_code”).
Permitted
Values
String within 32 characters
Default Blank
Web UI Features->Pick up & Park->Directed Call Pickup Code
Parameter
account.X.direct_pickup_code
[1]
<MAC>.cfg
Description
It configures the directed call pickup code.
Note: The directed call pickup code configured on a per-line basis (configured by the parameter accoun-
t.X.direct_pickup_code”) takes precedence over that configured on a phone basis (configured by the para-
meter features.pickup.direct_pickup_code”).
Permitted
Values
String within 32 characters
Default Blank
Web UI Account->Advanced->Directed Call Pickup Code
[1]
X is the account ID. For T58V/T58A/T56A, X=1-16; for CP960, X=1.
Group Call Pickup
Group call pickup is used for picking up incoming calls within a predefined group. When any phone within a pre-
defined group of phones receives an incoming call, you can pick up that call easily on the phone.
If you enable group call pickup, the phone screen will display a GPickup soft key when picking up the handset, tap-
ping the Speakerphone key or tapping the line key. As shown below:

Table of Contents

Other manuals for Yealink T5 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink T5 Series and is the answer not in the manual?

Yealink T5 Series Specifications

General IconGeneral
BrandYealink
ModelT5 Series
CategoryIP Phone
LanguageEnglish

Related product manuals