Yealink T5 Series Administrator's Guide

Phone Customization
113
4. Save the change and place this file to the provisioning server.
Softkey Layout Configuration
The following table lists the parameters you can use to configure the softkey layout.
Parameter phone_setting.custom_softkey_enable <y0000000000xx>.cfg
Description
It enables or disables the custom soft keys layout feature.
Note: It is not applicable to CP960 phones.
Permitted
Values
0-Disabled
1-Enabled
Default 0
Web UI Settings->Softkey Layout->Custom SoftKey
Parameter custom_softkey_call_failed.url <y0000000000xx>.cfg
Description
It configures the access URL of the custom softkey layout file in the CallFailed state.
Note: It works only if “phone_setting.custom_softkey_enable” is set to 1 (Enabled). It is not applicable to
CP960 phones.
Permitted
Values
URL within 511 characters
Default Blank
Parameter custom_softkey_call_in.url <y0000000000xx>.cfg
Description
It configures the access URL of the custom softkey layout file in the CallIn state.
Note: It works only if “phone_setting.custom_softkey_enable” is set to 1 (Enabled). It is not applicable to
CP960 phones.
Permitted
Values
URL within 511 characters
Default Blank
Parameter custom_softkey_connecting.url <y0000000000xx>.cfg
Description It configures the access URL of the custom softkey layout file in the Connecting state.

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English