Yealink T5 Series Administrator's Guide

Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
236
Default 1
Web UI Features->General Information->Call Waiting
Phone UI Settings->Features->Call Waiting->Call Waiting
Parameter call_waiting.tone <y0000000000xx>.cfg
Description
It enables or disables the phone to play the call waiting tone when the phone receives an incoming call
during a call.
Note: It works only if “call_waiting.enable” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default 1
Web UI Features->Audio->Call Waiting Tone
Phone UI Settings->Features->Call Waiting->Play Tone
Parameter call_waiting.on_code <y0000000000xx>.cfg
Description
It configures the call waiting on code.
The phone will send the code to activate call waiting on server-side when you activate it on the phone.
Permitted
Values
String within 32 characters
Default Blank
Web UI Features->General Information->Call Waiting On Code
Phone UI Settings->Features->Call Waiting->On Code
Parameter call_waiting.off_code <y0000000000xx>.cfg
Description
It configures the call waiting off code.
The phone will send the code to deactivate call waiting on server-side when you deactivate it on the
phone.
Permitted
Values
String within 32 characters
Default Blank
Web UI Features->General Information->Call Waiting Off Code
Phone UI Settings->Features->Call Waiting->Off Code
Do Not Disturb (DND)
DND feature enables the phone to reject all incoming calls automatically when you do not want to be interrupted. You
can choose to implement DND locally on the phone or on the server-side.
Usually, you can activate DND when the phone is idle. The phone stays in the DND state until you deactivate DND
manually.
Topics
DND Settings Configuration

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English