Yealink T5 Series Administrator's Guide

Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
260
Call Recording Configuration
The following table lists the parameter you can use to configure call recording.
Parameter features.usb_call_recording.enable <y0000000000xx>.cfg
Description It enables or disables the call recording feature for the IP phone.
Permitted
Values
0-Disabled
1-Enabled, you can record the audio or video call by tapping the Record soft key (for T58V/T58A/T56A)/
(for CP960) during a call.
Default 1
Multicast Paging
Multicast Paging allows you to easily and quickly broadcast instant audio announcements to users who are listening to
a specific multicast group on a specific channel.
Yealink phones support the following 31 channels:
l 0: Broadcasts are sent to channel 0. Note that the Yealink phones running old firmware version (old paging mech-
anism) can be regarded as listening to channel 0. It is the default channel.
l 1 to 25: Broadcasts are sent to channel 1 to 25. We recommend that you specify these channels when broadcasting
with Polycom phones which have 25 channels you can listen to.
l 26 to 30: Broadcasts are sent to channel 26 to 30.
The phones can only send and receives broadcasts to/from the listened channels. Other channels’ broadcasts will be
ignored automatically by the IP phone.
Topics
Multicast Paging Group Configuration
Multicast Listening Group Configuration
Multicast Paging Settings
Multicast Paging Group Configuration
Yealink phones support up to 31 groups for paging. You can assign multicast IP address with a channel for each group,
and specify a label to each group to identify the phones in the group, such as All, Sales, or HR.
Tip
You can set a DSS key as Multicast Paging key or Paging list key on the phone, which allows you to send announcements to
the phones with the pre-configured multicast address(es) on the specific channel(s). For more information, refer to DSS
Keys.
The following table lists the parameters you can use to configure a multicast paging group.
Parameter
multicast.paging_address.X.ip_address
[1]
<y0000000000xx>.cfg
Description
It configures the IP address and port number of the multicast paging group in the paging list. It will be dis-
played on the phone screen when placing the multicast paging call.
Note: The valid multicast IP addresses range from 224.0.0.0 to 239.255.255.255.
Permitted
Values
String

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English