Yealink T5 Series Administrator's Guide

Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
274
Default 0
Web UI Features->Audio->Ringer Device for Headset
Audio Volume
You can configure the sending volume and ringer volume for the phone.
Topics
Sending Volume Configuration
Sending Volume Configuration
You can configure the sending volume of currently engaged audio devices (handset, speakerphone or headset) when
the phone is in use.
The following table lists the parameters you can use to configure sending volume.
Parameter
voice.handfree_send
[1]
<y0000000000xx>.cfg
Description
It configures the sending volume of the speaker.
Note: We recommend that you modify this parameter cautiously. A suitable value may render the voice
quality bad.
Permitted
Values
Integer from -50 to 50
Default 0
Web UI Features->Audio->Handfree Send Volume (-50~50)
Parameter voice.handfree.autoreset_spk_vol <y0000000000xx>.cfg
Description It configures the speaker's volume level during a call.
Permitted
Values
0-The speakerphone volume at the end of a call persists between calls.
1 to 15-The speakerphone volume does not persist between calls, and resets to this specified level each
new call.
Default 0
Parameter
voice.handset_send
[1]
<y0000000000xx>.cfg
Description
It configures the sending volume of the handset.
Note: We recommend that you modify this parameter cautiously. A suitable value may render the voice
quality bad. It is not applicable to CP960 phones.
Permitted
Values
Integer from -50 to 50
Default 0
Web UI Features->Audio->Handset Send Volume (-50~50)
Parameter voice.handset.autoreset_spk_vol <y0000000000xx>.cfg
Description
It configures the handset's volume level during a call.
Note: It is not applicable to CP960 phones.

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English