Yealink T5 Series Administrator's Guide

Phone Network
37
Note: Some applications may have restrictions on network type, causing some functions to be unavail-
able. Then you can enable this feature to help solve the problem. It is not applicable to CP960 phones.
Permitted
Values
0-Disabled, the returned network type value is the current actual network type.
1-Enabled
Default 0
[1]
If you change this parameter, the phone will reboot to make the change take effect.
[2]
X is Wi-Fi ID. X=1-5.
Real-Time Transport Protocol (RTP) Ports
You can specify the IP phone’s RTP port range. Since the IP phone supports conferencing and multiple RTP streams, it
can use several ports concurrently. The UDP port used for RTP streams is traditionally an even-numbered port. For
example, the default RTP min port on the phones is 11780. The first voice session sends RTP using port 11780. Addi-
tional calls would then use ports 11782, 11784, 11786, and so on. The phone is compatible with RFC 1889 - RTP: A Trans-
port Protocol for Real-Time Applications - and the updated RFC 3550.
It is only applicable to CP960 phones.
Topic
RTP Ports Configuration
RTP Ports Configuration
The following table lists the parameters you can use to configure RTP ports.
Parameter
static.network.port.min_rtpport
[1]
<y0000000000xx>.cfg
Description
It configures the minimum local RTP port.
Note: It is only applicable to CP960 phones.
Permitted
Values
Integer from 1024 to 65535
Default 11780
Web UI Network->Advanced->Local RTP Port->Min RTP Port (1024~65535)
Parameter
static.network.port.max_rtpport
[1]
<y0000000000xx>.cfg
Description
It configures the maximum local RTP port.
Note: It is only applicable to CP960 phones.
Permitted
Values
Integer from 1024 to 65535
Default 12780
Web UI Network->Advanced->Local RTP Port->Max RTP Port (1024~65535)
[1]
If you change this parameter, the phone will reboot to make the change take effect.

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English