Yealink T5 Series Administrator's Guide

Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
388
The default outgoing line for handset 2 is 2.
The default outgoing line for handset 3 is 3.
The default outgoing line for handset 4 is 4.
The default outgoing line for handset 5 is 5.
Web UI Account->Number Assignment->Outgoing lines->Default
Handset UI OK->Settings->Telephony->Default Line
[1]
X is the handset ID. X=1-5.
End Call on Hook
You can configure whether to end a call when you place the handset into the charge cradle.
It is not applicable to DD phones.
Topic
End Call on Hook Configuration
End Call on Hook Configuration
The following table lists the parameter you can use to configure the end call on hook.
Parameter phone_setting.end_call_on_hook.enable <y0000000000xx>.cfg
Description It enables or disables to end a call when placing the handset into the charger cradle.
Permitted Values
0-Never
1-Always
Default 1
Web UI Features->General Information->End Call On Hook
Advisory Tones
Advisory tones are the acoustic signals of your handset, which inform you of different actions and states.
It is not applicable to DD phones.
You can configure the following advisory tones independently of each other:
l Keypad Tone: plays when you press any key of the keypad.
l Confirmation: plays when you save settings or place the handset in the charger cradle.
l Low Battery: plays when battery capacity is low and the handset requires charging.
Topic
Advisory Tones Configuration
Advisory Tones Configuration
The following table lists the parameters you can use to configure the advisory tones.

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English