Yealink T5 Series Administrator's Guide

Using Handsets with T58V/T58A/T56A Phones
387
Description It configures the lines to receive incoming calls for a specific handset.
Permitted
Values
1-Line 1
2-Line 2
3-Line 3
4-Line 4
5-Line 5
Multiple line IDs are separated by commas.
Default
The incoming line for handset 1 (T58 Phone) is line 1-line5.
The incoming line for handset 2 is line 2.
The incoming line for handset 3 is line 3.
The incoming line for handset 4 is line 4.
The incoming line for handset 5 is line 5.
Web UI Account->Number Assignment->Incoming lines
Handset UI
OK->Settings->Telephony->Incoming Lines (Default PIN:0000) ->HandsetX
[1]
Parameter
handset.X.dial_out_lines
[1]
<y0000000000xx>.cfg
Description It configures the lines to place outgoing calls for a specific handset.
Permitted
Values
1-Line 1
2-Line 2
3-Line 3
4-Line 4
5-Line 5
Multiple line IDs are separated by commas.
Note: It is not applicable to CP960 phones.
Default
The outgoing line for handset 1 (T58 Phone) is line 1-line5.
The outgoing line for handset 2 is line 2.
The outgoing line for handset 3 is line 3.
The outgoing line for handset 4 is line 4.
The outgoing line for handset 5 is line 5.
Web UI Account->Number Assignment->Outgoing lines
Parameter
handset.X.dial_out_default_line
[1]
<y0000000000xx>.cfg
Description
It configures the default line to place outgoing calls for a specific handset.
Note: It is not applicable to CP960 phones.
Permitted
Values
Integer from 1 to 5
Default The default outgoing line for handset 1 (T58 Phone) is line 1.

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English