Call Features
227
Default 10
Web UI Features->General Information->Auto Redial Interval (1~300s)
Phone UI Settings->Features->Auto Redial->Redial Interval
Parameter auto_redial.times <y0000000000xx>.cfg
Description
It configures the auto redial times when the callee is temporarily unavailable.
The IP phone tries to redial the callee as many times as configured till the callee answers the call.
Permitted
Values
Integer from 1 to 300
Default 10
Web UI Features->General Information->Auto Redial Times (1~300)
Phone UI Settings->Features->Auto Redial->Redial Times
Parameter features.redial_via_local_sip_server.enable <y0000000000xx>.cfg
Description It configures the IP phone to redial via local SIP server or remote SIP server.
Permitted
Values
0-Remote SIP Server
1-Local SIP Server
Default 1
ReCall Configuration
ReCall, also known as last call return, allows you to dial the last received call. Recall is implemented on the phones
using a Recall key.
The following shows configuration for a Recall key.
Line Key Configuration Programmable Key Configuration
linekey.X.type = 7
linekey.X.label =Recall
programablekey.X.type = 7
After provisioning, a Recall key is available on the phone. When you tap the Recall key, the phone places a call to the
phone number that last called you.
Related Topics
Line Keys Configuration
Programmable Keys Configuration
Speed Dial
Speed dial allows you to speed up dialing the contacts on the phone’s idle screen using dedicated DSS keys.
Topic
Speed Dial Key Configuration