Yealink T5 Series Administrator's Guide

Call Features
247
Note
Forward mode is set by the parameter “features.fwd_mode”.
Yealink phones also support call forward on code and off code to activate and deactivate server-side call forward fea-
ture. They may vary on different servers.
Tip
You can set a DSS key as a Forward key, and specify a contact you want to forward the incoming calls to for this key. For
more information, refer to DSS Keys.
Topics
Call Forward in Phone Mode Configuration
Call Forward in Custom Mode Configuration
Call Forward in Phone Mode Configuration
The following table lists the parameters you can use to configure call forward in Phone mode.
Parameter forward.always.enable <y0000000000xx>.cfg
Description
It triggers the always forward feature to on or off on a phone basis.
Note: It works only if “features.fwd_mode” is set to 0 (Phone)(except CP960 phones)
Permitted
Values
0-Off
1-On, incoming calls are forwarded to the destination number (configured by the parameter “for-
ward.always.target”) immediately.
Default 0
Web UI Features->Forward&DND->Forward->Always Forward->On/Off
Phone UI Settings->Features->Call Forward->Always Forward->Always Forward
Parameter forward.always.target <y0000000000xx>.cfg
Description
It configures the destination number of the always forward on a phone basis.\
Note: It works only if “features.fwd_mode” is set to 0 (Phone)(except CP960 phones).
Permitted
Values
String within 32 characters
Default Blank
Web UI Features->Forward&DND->Forward->Always Forward->Target
Phone UI Settings->Features->Call Forward->Always Forward->Forward To
Parameter forward.always.on_code <y0000000000xx>.cfg
Description
It configures the always forward on code to activate the server-side always forward feature.
The phone will send the always forward on code and the pre-configured destination number (configured
by the parameter “forward.always.target”) to the server when you activate always forward feature on a
phone basis.
Note: It works only if “features.fwd_mode” is set to 0 (Phone)(except CP960 phones).
Permitted
Values
String within 32 characters

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English