Yealink T5 Series

Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
248
Default Blank
Web UI Features->Forward&DND->Forward->Always Forward->On Code
Phone UI Settings->Features->Call Forward->Always Forward->On Code
Parameter forward.always.off_code <y0000000000xx>.cfg
Description
It configures the always forward off code to deactivate the server-side always forward feature.
The phone will send the always forward off code to the server when you deactivate always forward fea-
ture on a phone basis.
Note: It works only if “features.fwd_mode” is set to 0 (Phone)(except CP960 phones).
Permitted
Values
String within 32 characters
Default Blank
Web UI Features->Forward&DND->Forward->Always Forward->Off Code
Phone UI Settings->Features->Call Forward->Always Forward->Off Code
Parameter forward.busy.enable <y0000000000xx>.cfg
Description
It triggers the busy forward feature to on or off on a phone basis.
Note: It works only if “features.fwd_mode” is set to 0 (Phone)(except CP960 phones).
Permitted
Values
0-Off
1-On, incoming calls are forwarded to the destination number (configured by the parameter “for-
ward.busy.target”) when the callee is busy.
Default 0
Web UI Features->Forward&DND->Forward->Busy Forward->On/Off
Phone UI Settings->Features->Call Forward->Busy Forward->Busy Forward
Parameter forward.busy.target <y0000000000xx>.cfg
Description
It configures the destination number of the busy forward on a phone basis.
Note: It works only if “features.fwd_mode” is set to 0 (Phone)(except CP960 phones).
Permitted
Values
String within 32 characters
Default Blank
Web UI Features->Forward&DND->Forward->Busy Forward->Target
Phone UI Settings->Features->Call Forward-> Busy Forward->Forward To
Parameter forward.busy.on_code <y0000000000xx>.cfg
Description
It configures the busy forward on code to activate the server-side busy forward feature.
The phone will send the busy forward on code and the pre-configured destination number (configured
by the parameter “forward.busy.target”) to the server when you activate the busy forward feature on a
phone basis.
Note: It works only if “features.fwd_mode” is set to 0 (Phone)(except CP960 phones).
Permitted
String within 32 characters