Yealink T5 Series Administrator's Guide

Call Features
249
Values
Default Blank
Web UI Features->Forward&DND->Forward->Busy Forward->On Code
Phone UI Settings->Features->Call Forward->Busy Forward->On Code
Parameter forward.busy.off_code <y0000000000xx>.cfg
Description
It configures the busy forward off code to deactivate the server-side busy forward feature.
The phone will send the busy forward off code to the server when you deactivate the busy forward fea-
ture on a phone basis.
Note: It works only if “features.fwd_mode” is set to 0 (Phone)(except CP960 phones).
Permitted
Values
String within 32 characters
Default Blank
Web UI Features->Forward&DND->Forward->Busy Forward->Off Code
Phone UI Settings->Features->Call Forward->Busy Forward->Off Code
Parameter forward.no_answer.enable <y0000000000xx>.cfg
Description
It triggers the no answer forward feature to on or off on a phone basis.
Note: It works only if “features.fwd_mode” is set to 0 (Phone)(except CP960 phones). DND activated on
the IP phone deactivates the local No Answer Forward settings.
Permitted
Values
0-Off
1-On, incoming calls are forwarded to the destination number (configured by the parameter “forward.no_
answer.target”) after a period of ring time.
Default 0
Web UI Features->Forward&DND->Forward->No Answer Forward->On/Off
Phone UI Settings->Features->Call Forward->No Answer Forward->No Answer Forward
Parameter forward.no_answer.target <y0000000000xx>.cfg
Description
It configures the destination number of the no answer forward on a phone basis.
Note: It works only if “features.fwd_mode” is set to 0 (Phone)(except CP960 phones).
Permitted
Values
String within 32 characters
Default Blank
Web UI Features->Forward&DND->Forward->No Answer Forward->Target
Phone UI Settings->Features->Call Forward->No Answer Forward->Forward To
Parameter forward.no_answer.timeout <y0000000000xx>.cfg
Description
It configures ring times (N) to wait before forwarding incoming calls.
The incoming calls will be forwarded when not answered after N*M (M is configurable by “phone_set-
ting.ring_duration”) seconds.
Note: It works only if “features.fwd_mode” is set to 0 (Phone) (except CP960 phones).

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English