Yealink T5 Series Administrator's Guide

Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
250
Permitted
Values
Integer from 0 to 20 (determined by “features.forward.no_answer.show_ring_times”)
Default 2
Web UI Features->Forward&DND->Forward->No Answer Forward->After Ring Time (0~120s)
Phone UI Settings->Features->Call Forward->No Answer Forward->After Ring Time
Parameter features.forward.no_answer.show_ring_times <y0000000000xx>.cfg
Description
It configures the permitted values of the ring times (N) to wait before forwarding incoming calls.
Example:
features.forward.no_answer.show_ring_times = 0,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19
Note: It works only if “forward.no_answer.enable” or “account.X.timeout_fwd.enable” is set to 1
(Enabled).
Permitted
Values
String within 512 characters
Default 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20 (1 is not applicable to BroadSoft users)
Parameter phone_setting.ring_duration <y0000000000xx>.cfg
Description
It configures the interval (in seconds) of the ring for the no answer forward feature.
Note: It works only if “forward.no_answer.enable” or “account.X.timeout_fwd.enable” is set to 1
(Enabled).
Permitted
Values
Integer greater than or equal to 0
Default 6
Parameter forward.no_answer.on_code <y0000000000xx>.cfg
Description
It configures the no answer forward on code to activate the server-side no answer forward feature.
The phone will send the no answer forward on code and the pre-configured destination number (con-
figured by the parameter “forward.no_answer.target”) to the server when you activate the no answer for-
ward feature on a phone basis.
Permitted
Values
String within 32 characters
Default Blank
Web UI Features->Forward&DND->Forward->No Answer Forward->On Code
Phone UI Settings->Features->Call Forward->No Answer Forward->On Code
Parameter forward.no_answer.off_code <y0000000000xx>.cfg
Description
It configures the no answer forward off code to deactivate the server-side no answer forward feature.
The phone will send the no answer forward off code to the server when you deactivate the no answer for-
ward feature on a phone basis.
Note: It works only if “features.fwd_mode” is set to 0 (Phone)(except CP960 phones).
Permitted
Values
String within 32 characters

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English