Yealink T5 Series Administrator's Guide

Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
36
If “static.wifi.X.security_mode” is set to NONE, the permitted value of this parameter is NONE.
If “static.wifi.X.security_mode” is set to WEP, the permitted value of this parameter is WEP.
If “static.wifi.X.security_mode” is set to other values, the permitted values of this parameter are TKIP, AES
or TKIP AES.
Note: It works only if “static.wifi.enable” is set to 1 (Enabled).
Permitted
Values
NONE, WEP, TKIP, AES or TKIP AES
Default NONE
Parameter
static.wifi.X.password
[2]
<y0000000000xx>.cfg
Description
It configures the password of a specific wireless network.
Note: It works only if “static.wifi.enable” is set to 1 (Enabled) and “static.wifi.X.security_mode” is set to
WEP, WPA-PSK or WPA2-PSK.
Permitted
Values
String within 64 characters
Default Blank
Parameter
static.wifi.X.eap_type
[2]
<y0000000000xx>.cfg
Description
It configures the EAP authentication mode of a specific wireless network.
Note: It works only if “static.wifi.enable” is set to 1 (Enabled) and “static.wifi.X.security_mode” is set to
WPA-EAP or WPA2-EAP.
Permitted
Values
TTLS, PEAP or TLS
Default Blank
Parameter
static.wifi.X.eap_user_name
[2]
<y0000000000xx>.cfg
Description
It configures the EAP authentication username of a specific wireless network.
Note: It works only if “static.wifi.enable” is set to 1 (Enabled), “static.wifi.X.security_mode” is set to WPA-
EAP or WPA2-EAP and “static.wifi.X.eap_type” is set to TTLS or PEAP.
Permitted
Values
String within 32 characters
Default Blank
Parameter
static.wifi.X.eap_password
[2]
<y0000000000xx>.cfg
Description
It configures the EAP authentication password of a specific wireless network.
Note: It works only if “static.wifi.enable” is set to 1 (Enabled) and “static.wifi.X.security_mode” is set to
WPA-EAP or WPA2-EAP.
Permitted
Values
String within 64 characters
Default Blank
Parameter
static.network.ethernet_as_wifi.enable
[1]
<y0000000000xx>.cfg
Description
It enables or disables the network type value returned from interface "Con-
nectivityManager.getActiveNetworkInfo()" to be changed from Ethernet to WIFI.

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English