Yealink T5 Series Administrator's Guide

Phone Provisioning
65
Default 5
Web UI Settings->Auto Provision->Attempt Expired Time(s)
Parameter
static.network.attempt_expired_time
[1]
<y0000000000xx>.cfg
Description
It configures the timeout (in seconds) to transfer a file for HTTP/HTTPS connection.
Note: It has a lower priority than the value defined by the parameter “static.auto_provision.attempt_
expired_time”.
Permitted
Values
Integer from 1 to 20
Default 10
Parameter static.auto_provision.attempt_before_failed <y0000000000xx>.cfg
Description
It configures the maximum number of attempts to transfer a file before the transfer fails during auto pro-
visioning.
Permitted
Values
Integer from 1 to 10
Default 3
Parameter
static.auto_provision.retry_delay_after_file_transfer_
failed
<y0000000000xx>.cfg
Description
It configures the time (in seconds) to wait after a file transfer fails before retrying the transfer via auto pro-
visioning.
Permitted
Values
Integer from 0 to 300
Default 5
Parameter
static.auto_provision.reboot_force.enable
[1]
<y0000000000xx>.cfg
Description
It enables or disables the phone to reboot after auto provisioning, even if there is no specific con-
figuration requiring a reboot.
Note: It works only for the current auto provisioning process. If you want the phone to reboot after every
auto provisioning process, the parameter must be always contained in the configuration file and set to 1.
If the phone reboots repeatedly after it is set to 1, you can try to set “static.auto_provision.power_on" to 0
(Off).
Permitted
Values
0-Disabled
1-Enabled
Default Blank
Parameter features.action_uri_force_autop <y0000000000xx>.cfg
Description
It enables or disables the phone to end the call for triggering auto provisioning immediately when receiv-
ing an HTTP or HTTPS GET request with the variable value set to AutoP during a call.
Note: It works only if “features.action_uri.enable” is set to 1 (Enabled).
Permitted
Values
0-Disabled, the phone triggers auto provisioning after the call.
1-Enabled
Default 0
Parameter static.auto_provision.power_on <y0000000000xx>.cfg

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English