Yealink T5 Series Administrator's Guide

Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
66
Description It triggers the power on feature to on or off.
Permitted
Values
0-Off
1-On, the phone performs auto provisioning when powered on.
Default 1
Web UI Settings->Auto Provision->Power On
Parameter static.auto_provision.repeat.enable <y0000000000xx>.cfg
Description It triggers the repeatedly feature to on or off.
Permitted
Values
0-Off
1-On
Default 0
Web UI Settings->Auto Provision->Repeatedly
Parameter static.auto_provision.repeat.minutes <y0000000000xx>.cfg
Description
It configures the interval (in minutes) for the phone to perform auto provisioning repeatedly.
Note: It works only if “static.auto_provision.repeat.enable” is set to 1 (On).
Permitted
Values
Integer from 1 to 43200
Default 1440
Web UI Settings->Auto Provision->Interval(Minutes)
Parameter static.auto_provision.weekly.enable <y0000000000xx>.cfg
Description It triggers the weekly feature to on or off.
Permitted
Values
0-Off
1-On, the phone performs an auto provisioning process weekly.
Default 0
Web UI Settings->Auto Provision->Weekly
Parameter static.auto_provision.weekly_upgrade_interval <y0000000000xx>.cfg
Description
It configures the time interval (in weeks) for the phone to perform auto provisioning.
If it is set to 0, the phone performs auto provisioning at the specific day(s) configured by the parameter
“static.auto_provision.weekly.dayofweek” every week.
If it is set to other values (for example, 3), the phone performs auto provisioning at a random day between
the specific day(s) configured by the parameter “static.auto_provision.weekly.dayofweek” every three
weeks.
Note: It works only if “static.auto_provision.weekly.enable” is set to 1 (On).
Permitted
Values
Integer from 0 to 12
Default 0
Web UI Settings->Auto Provision->Weekly Upgrade Interval(0~12week)

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English