Yealink T5 Series Administrator's Guide

Phone Customization
117
Web UI Features->Power LED->Voice/Text Mail Power Light Flash
Parameter phone_setting.mute_power_led_flash_enable <y0000000000xx>.cfg
Description
It enables or disables the power LED indicator to flash when a call is muted.
Note: It is not applicable to CP960 phones.
Permitted
Values
0-Disabled (power LED indicator does not flash)
1-Enabled (power LED indicator fast flashes (300ms) red)
Default 0
Web UI Features->Power LED->Mute Power Light Flash
Parameter
phone_setting.hold_and_held_power_led_flash_
enable
<y0000000000xx>.cfg
Description
It enables or disables the power LED indicator (for T58V/T58A/T56A)/mute LED indicator (for CP960) to
flash when a call is placed on hold or is held.
Note: For CP960, it works only if the phone is not in the mute state.
Permitted
Values
0-Disabled (power LED indicator/mute LED indicator does not flash)
1-Enabled ( power LED indicator/mute LED indicator fast flashes (500ms) red)
Default 0
Web UI Features->Power LED->Hold/Held Power Light Flash (not for CP960)
Parameter phone_setting.talk_and_dial_power_led_enable <y0000000000xx>.cfg
Description
It enables or disables the power LED indicator to be turned on when the phone is busy.
Note: It is not applicable to CP960 phones.
Permitted
Values
0-Disabled (power LED indicator is off)
1-Enabled (power LED indicator glows red)
Default 0
Web UI Features->Power LED->Talk/Dial Power Light On
Parameter phone_setting.missed_call_power_led_flash.enable <y0000000000xx>.cfg
Description
It enables or disables the power LED indicator to flash when the phone misses a call.
Note: It is not applicable to CP960 phones.
Permitted
Values
0-Disabled (power LED indicator does not flash)
1-Enabled (power LED indicator slowly flashes (1000ms) red)
Default 1
Web UI Features->Power LED->MissCall Power Light Flash

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English