Yealink T5 Series Administrator's Guide

Phone Customization
131
Description It configures the history type of programmable key.
Permitted
Values
0-Local History
1-Network CallLog (only appear when "bw.enable=1" and "bw.xsi.call_log.enable=1")
Default 0
Web UI Dsskey->Programmable Key->Line
Parameter
programablekey.X.line
[1]
<y0000000000xx>.cfg
Description
It configures the desired line to apply the programmable key feature.
Note: It is not applicable to CP960 phones.
Permitted
Values
1-Line 1
2-Line 2
…
16-Line 16
Default 1
Web UI Dsskey>Programmable Key->Line
Parameter
programablekey.X.value
[1]
<y0000000000xx>.cfg
Description
It configures the value for some programmable key features.
Note: You need to configure this parameter when “programablekey.X.type” is set to 2, 9, 13, 14, 23, 24, 27,
40 or 73.
Permitted
Values
String within 99 characters
Default Blank
Web UI Dsskey->Programmable Key->Value
Parameter
programablekey.X.label
[1]
(X=1-4)
<y0000000000xx>.cfg
Description
It configures the label displayed on the phone screen for a specific programmable key.
This is an optional configuration.
Permitted
Values
String within 99 characters
Default Blank
Web UI Dsskey->Programmable Key->Label
Parameter
programablekey.X.extension
[1]
<y0000000000xx>.cfg
Description
For multicast paging:
It configures the channel of the multicast paging group.
For intercom feature:
It configures the pickup code.
For speed dial feature:

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English