Yealink T5 Series Administrator's Guide

Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
146
Description
It configures the text string used as a label of the user input prompt X.
If it is left blank, Default is displayed.
Example:
edk.edkprompt.1.label = Enter Password
Note: It works only if “features.enhanced_dss_keys.enable” and “edk.edkprompt.X.enable” are set to 1
(Enabled). It is not applicable to CP960 phones.
Permitted
Values
String
Default Default
Parameter
edk.edkprompt.X.type
[1]
<y0000000000xx>.cfg
Description
It configures the type of characters entered by the user for user input prompt X.
If it is set to numeric, the default input method is 123, and you can switch among abc/ABC/2aB input
methods.
If it is set to text, the default input method is abc, and you can switch among ABC/2aB/123 input meth-
ods.
Example:
edk.edkprompt.1.type = numeric
Note: It works only if “features.enhanced_dss_keys.enable” and “edk.edkprompt.X.enable” are set to 1
(Enabled). It is not applicable to CP960 phones.
Permitted
Values
text or numeric
Default text
Parameter
edk.edkprompt.X.userfeedback
[1]
<y0000000000xx>.cfg
Description
It configures the user input feedback method for user input prompt X.
Example:
edk.edkprompt.1.userfeedback = masked
Note: It works only if “features.enhanced_dss_keys.enable” and “edk.edkprompt.X.enable” are set to 1
(Enabled). It is not applicable to CP960 phones.
Permitted
Values
visible-the entered text is visible.
masked-the entered text is displayed as dot characters "
.
". It can be used to mask password fields.
Default visible
Parameter
edk.edkprompt.X.title
[1]
<y0000000000xx>.cfg
Description
It configures the text string used as a title for the user input prompt X. The title appears at the top of the
user input prompt screen.
If it is left blank, EDK Prompt is displayed.
Example:
edk.edkprompt.1.title = MyTitle

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English