Yealink T5 Series Administrator's Guide

Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
148
Default Blank
Parameter
softkey.X.position
[1]
<y0000000000xx>.cfg
Description
It configures the location on the phone screen for soft key X.
Note: It works only if “features.enhanced_dss_keys.enable” and “softkey.X.enable” are set to 1 (Enabled).
It is not applicable to CP960 phones.
Permitted
Values
Integer from 0 to 10
If it is set to 0, the soft key X is located in the first available position from the left.
Default 0
Parameter
softkey.X.action
[1]
<y0000000000xx>.cfg
Description
It configures the action or function for custom soft key X.
This value uses the same macro action string syntax as an Enhanced DSS key.
You can also invoke the EDK macro that was already defined. The macro name follows the character “!”.
Example:
softkey.1.action = !macro1
In this example, macro1 stands for the macro name configured by the parameter “edk.edklist.X.mname”.
Note: It works only if “features.enhanced_dss_keys.enable” and “softkey.X.enable” are set to 1 (Enabled).
It is not applicable to CP960 phones.
Permitted
Values
String
Default Blank
Parameter
softkey.X.use.idle
[1]
<y0000000000xx>.cfg
Description
It enables or disables the custom soft key X to be displayed in the idle state.
Note: It works only if “features.enhanced_dss_keys.enable” and “softkey.X.enable” are set to 1 (Enabled).
It is not applicable to CP960 phones.
Permitted
Values
0-Disabled
1-Enabled
Default 0
Parameter
softkey.X.use.incoming_call
[1]
<y0000000000xx>.cfg
Description
It enables or disables the custom soft key X to be displayed in the alerting (ringing) state.
Note: It works only if “features.enhanced_dss_keys.enable” and “softkey.X.enable” are set to 1 (Enabled).
It is not applicable to CP960 phones.
Permitted
Values
0-Disabled
1-Enabled
Default 0
Parameter
softkey.X.use.connecting
[1]
<y0000000000xx>.cfg
Description
It enables or disables the custom soft key X to be displayed in the connecting state.
Note: It works only if “features.enhanced_dss_keys.enable” and “softkey.X.enable” are set to 1 (Enabled).
It is not applicable to CP960 phones.

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English