Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
152
Parameter features.power_saving.off_hour.idle_timeout <y0000000000xx>.cfg
Description
It configures the time (in minutes) to wait in the idle state before phone enters power-saving mode dur-
ing the non-office hours.
Permitted
Values
Integer from 1 to 10
Default 10
Web UI Settings->Power Saving->Off Hour Idle TimeOut
Parameter features.power_saving.user_input_ext.idle_timeout <y0000000000xx>.cfg
Description
It configures the minimum time (in minutes) to wait in the idle state - after using the phone - before the
phone enters the power-saving mode.
Permitted
Values
Integer from 1 to 30
Default 10
Web UI Settings->Power Saving->User Input Extension Idle TimeOut
Parameter
features.power_saving.office_hour.monday
features.power_saving.office_hour.tuesday
features.power_saving.office_hour.wednesday
features.power_saving.office_hour.thursday
features.power_saving.office_hour.friday
features.power_saving.office_hour.saturday
features.power_saving.office_hour.sunday
<y0000000000xx>.cfg
Description
It configures the start time and end time of the day’s office hour.
Start time and end time are separated by a comma.
Start time and end time are separated by a comma.
Example:
features.power_saving.office_hour.monday = 7,19
Permitted
Values
Integer from 0 to 23, Integer from 0 to 23
Default
7,19 - for Monday, Tuesday, Wednesday, Thursday, Friday.
7,7 - for Saturday, Sunday.
Web UI Settings->Power Saving->Monday/Tuesday/Wednesday/Thursday/Friday/Saturday/Sunday
Parameter features.power_saving.power_led_flash.on_time <y0000000000xx>.cfg
Description
It configures the period of time (in milliseconds) when the power LED indicator is on in the power-saving
mode.
If it is set to 0 and “features.power_saving.power_led_flash.off_time” is not set to 0, the power LED indic-
ator will be off when the IP phone enters the power-saving mode.
Note: It is only applicable to T58V/T58A/T56A phones.
Permitted
0, Integer from 100 to 10000