Yealink T5 Series Administrator's Guide

Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
264
Web UI Directory->Multicast IP->Paging Barge
Parameter multicast.receive.ignore_dnd.priority <y0000000000xx>.cfg
Description
It configures the lowest priority of the multicast paging call that can be received when DND is activated in
phone mode.
1 is the highest priority, 31 is the lowest priority.
Permitted
Values
0-Disabled, all incoming multicast paging calls will be automatically ignored when DND is activated in
phone mode.
1-1
2-2
3-3
...
31-31
If it is not set to 0 (Disabled), the phone will receive the incoming multicast paging call with a higher or
same priority than this value and ignore that with a lower priority than this value when DND is activated
in phone mode.
Default 0
Web UI Directory->Multicast IP->Ignore DND
Parameter multicast.receive.use_speaker <y0000000000xx>.cfg
Description
It enables or disables the phone to always use the speaker as the audio device when receiving the mul-
ticast paging calls.
Note: It is not applicable to CP960 phones.
Permitted
Values
0-Disabled, the engaged audio device will be used when receiving the multicast paging calls.
1-Enabled
Default 0
[1]
X ranges from 1 to 31.

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English