Yealink T5 Series Administrator's Guide

Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
284
Note: The priority of the codec in disable codec list is not specified, and numerical value 1 is defined as
the highest priority in the enable codec list. The name of the audio codec in this parameter should be the
correct one as listed in the above example, otherwise the corresponding configuration will not take
effect.
Permitted
Values
Integer from 0 to 16
Default
Default:
When the audio codec is G722.1c,(48kb/s), the default value is 1;
When the audio codec is G722.1c,(32kb/s), the default value is 2;
When the audio codec is G722.1c,(24kb/s), the default value is 3;
When the audio codec is G722.1,(24kb/s), the default value is 4;
When the audio codec is G722, the default value is 5;
When the audio codec is PCMU, the default value is 6;
When the audio codec is PCMA, the default value is 7;
When the audio codec is G729, the default value is 8;
When the audio codec is G726_16, the default value is 0;
When the audio codec is G726_24, the default value is 0;
When the audio codec is G726_32, the default value is 0;
When the audio codec is G726_40, the default value is 0;
When the audio codec is G723_53, the default value is 0;
When the audio codec is G723_63, the default value is 0;
When the audio codec is Opus, the default value is 0;
When the audio codec is iLBC, the default value is 0;
Web UI Account->Codec->Audio Codec
Parameter
account.X.codec.opus.para
[1]
<MAC>.cfg
Description It configures the sample rate of the Opus audio codec.
Permitted
Values
opus-fb-Opus-FB (48KHz)
opus-swb-Opus-SWB (24KHz)
opus-wb-Opus-WB (16KHz)
opus-mb-Opus-MB (12KHz)
opus-nb-Opus-NB (8KHz)
Default opus-fb
Web UI Account->Codec->Opus Sample Rate
[1]
X is the account ID. For T58V/T58A/T56A, X=1-16; for CP960, X=1.

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English