EasyManuals Logo

Yealink T5 Series Administrator's Guide

Yealink T5 Series
472 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #308 background imageLoading...
Page #308 background image
Administrators Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
302
Permitted
Values
0-Disabled
1-Enabled
Default 1
Web UI Settings->Voice Monitoring->Report options on phone->Local User
Parameter
phone_setting.vq_rtcpxr_display_remote_call_id.en-
able
<y0000000000xx>.cfg
Description
It enables or disables the phone to display Remote User on the phone screen
Note: It works only if phone_setting.vq_rtcpxr.states_show_on_gui.enable” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default 1
Web UI Settings->Voice Monitoring->Report options on phone->Remote User
Parameter phone_setting.vq_rtcpxr_display_local_codec.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to display Local Codec on the phone screen
Note: It works only if phone_setting.vq_rtcpxr.states_show_on_gui.enable” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default 1
Web UI Settings->Voice Monitoring->Report options on phone->Local Codec
Parameter
phone_setting.vq_rtcpxr_display_remote_codec.en-
able
<y0000000000xx>.cfg
Description
It enables or disables the phone to display Remote Codec on the phone screen
Note: It works only if phone_setting.vq_rtcpxr.states_show_on_gui.enable” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default 1
Web UI Settings->Voice Monitoring->Report options on phone->Remote Codec
Parameter phone_setting.vq_rtcpxr_display_jitter.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to display Jitter on the phone screen.
Note: It works only if phone_setting.vq_rtcpxr.states_show_on_gui.enable” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default 1
Web UI Settings->Voice Monitoring->Report options on phone->Jitter
Parameter
phone_setting.vq_rtcpxr_display_jitter_buffer_
max.enable
<y0000000000xx>.cfg
Description
It enables or disables the phone to display Jitter Buffer Max on the phone screen.
Note: It works only if phone_setting.vq_rtcpxr.states_show_on_gui.enable” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled

Table of Contents

Other manuals for Yealink T5 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink T5 Series and is the answer not in the manual?

Yealink T5 Series Specifications

General IconGeneral
BrandYealink
ModelT5 Series
CategoryIP Phone
LanguageEnglish

Related product manuals