Yealink T5 Series Administrator's Guide

Phone Network
25
Note: It works only if “static.network.ip_address_mode” is set to 1 (IPv6) or 2 (IPv4 & IPv6), and "stat-
ic.network.ipv6_internet_port.type" is set to 1 (Static IP Address).
Permitted
Values
Integer from 0 to 128
Default 64
Web UI Network->Basic->IPv6 Config->Configuration Type (Static IP)->IPv6 Prefix(0~128)
Phone UI
Settings->Advanced Settings (default password: admin) ->Network->WAN Port->IPv6->Type (Static IP) -
>IPv6 IP Prefix
Parameter
static.network.ipv6_internet_port.gateway
[1]
<y0000000000xx>.cfg
Description
It configures the IPv6 default gateway.
Note: It works only if “static.network.ip_address_mode” is set to 1 (IPv6) or 2 ( IPv4 & IPv6), and "stat-
ic.network.ipv6_internet_port.type" is set to 1 (Static IP Address).
Permitted
Values
IPv6 Address
Default Blank
Web UI Network->Basic->IPv6 Config->Configuration Type (Static IP)->Default Gateway
Phone UI
Settings->Advanced Settings (default password: admin) ->Network->WAN Port->IPv6->Type (Static IP) -
>Gateway
Parameter
static.network.ipv6_static_dns_enable
[1]
<y0000000000xx>.cfg
Description
It triggers the static IPv6 DNS feature to on or off.
Note: It works only if “static.network.ipv6_internet_port.type” is set to 0 (DHCP).
Permitted
Values
0-Off, the phone will use the IPv6 DNS obtained from DHCP.
1-On, the phone will use manually configured static IPv6 DNS.
Default 0
Web UI Network->Basic->IPv6 Config->Static IPv6 DNS
Phone UI Settings->Advanced Setting (default: admin) ->Network->WAN Port->IPv6->Type (DHCP) ->Static DNS
Parameter
static.network.ipv6_primary_dns
[1]
<y0000000000xx>.cfg
Description
It configures the primary IPv6 DNS server.
Note: It works only if “static.network.ip_address_mode" is set to 1 (IPv6) or 2 (IPv4 & IPv6). In DHCP envir-
onment, you also need to make sure “static.network.ipv6_static_dns_enable" is set to 1 (On).
Permitted
Values
IPv6 Address
Default Blank
Web UI Network->Basic->IPv6 Config->Static IPv6 DNS->Primary DNS
Phone UI
Settings->Advanced Settings (default password: admin) ->Network->WAN Port->IPv6->Type (Static IP) -
>Primary DNS
Or Settings->Advanced Settings (default password: admin) ->Network->WAN Port->IPv6->Type (DHCP)
->Static DNS (Enabled) ->Primary DNS
Parameter
static.network.ipv6_secondary_dns
[1]
<y0000000000xx>.cfg

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English