Video Features
307
Web UI Settings->Video->Video Active
Parameter camera.flicker <y0000000000xx>.cfg
Description
It configures camera flicker frequency (Hz).
Note: Indoor lights powered by a 50Hz or 60Hz power source can produce a flicker. You can adjust the
camera flicker frequency according to the power source. It is not applicable to T56A/CP960 phones.
Permitted
Values
50-50Hz
60-60Hz
Default 50
Parameter features.default_layout <y0000000000xx>.cfg
Description
It configures the default call layout after a single-way call is set up.
Note: It is not applicable to CP960 phones. It works only if "video.enable" is set to 1 or 2. There is no near-
site video image on the T56A phones.
Permitted
Values
1-Focus Big: One video image displays in a large size, the other video image along the right side of the
screen displays in small size.
2-Focus Full screen: One video image displays in full size, the other video images are hidden.
3-Equal: All video images display in the same size.
Default 1
Web UI Features->General Information->Default Layout
Parameter features.full_screen_in_call_enable <y0000000000xx>.cfg
Description It enables or disables the phone to enter the full screen automatically when a video call is set up.
Permitted
Values
0-Disabled
1-Enabled
Note: It is not applicable to CP960 phones. It woks only if “video.enable” is set to 1 (Video first) or 2
(Optional).
Default 1
Web UI Features->General Information->Full Screen In Call
Parameter features.video_call_bandwidth <y0000000000xx>.cfg
Description
It specifies the transmission bandwidth for a video call.
Note: It is not applicable to T56A/CP960 phones. It woks only if “video.enable” is set to 1 (Video first) or 2
(Optional). We recommend you to reduce transmission bandwidth when network environment is rel-
atively poor.
Permitted
Values
0-Auto, the default transmission bandwidth is 768kb/s. The network environment may affect the per-
formance of the phone.
256-256kb/s
384-384kb/s
512-512kb/s
640-640kb/s
To Next Page
Loading...
Need help?
General
