Yealink T5 Series Administrator's Guide

Advanced Features
355
Values 1-Enabled, the microphone is muted for intercom calls, and then the other party cannot hear you.
Default 0
Web UI Features->Intercom->Intercom Mute
Phone UI Settings->Features->Intercom->Intercom Mute
Parameter features.intercom.tone <y0000000000xx>.cfg
Description
It enables or disables the phone to play a warning tone when answering an intercom call.
Note: It works only if “features.intercom.allow” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default 1
Web UI Features->Intercom->Intercom Tone
Phone UI Settings->Features->Intercom->Intercom Tone
Parameter features.intercom.barge <y0000000000xx>.cfg
Description
It enables or disables the phone to answer an incoming intercom call while there is already an active call
on the IP phone.
Note: It works only if “features.intercom.allow” and "call_waiting.enable" are set to 1 (Enabled) and
“phone_setting.call_appearance.calls_per_linekey” is greater than 1.
Permitted
Values
0-Disabled, the phone will handle an incoming intercom call like a normal incoming call while there is
already an active call on the IP phone.
1-Enabled, the phone will automatically answer the intercom call while there is already an active call on
the IP phone and place the active call on hold.
Default 0
Web UI Features->Intercom->Intercom Barge
Phone UI Settings->Features->Intercom->Intercom Barge
Parameter features.intercom.barge_in_dialing.enable <y0000000000xx>.cfg
Description
It enables or disables the intercom call to answer an incoming intercom call while dialing.
Note: It works only if “features.intercom.barge” is set to 0 (Disabled).
Permitted
Values
0-Disabled, the phone handles the intercom call like a normal incoming call.
1-Enabled, the phone stops dialing, and automatically answers the intercom call.
Default 0
Parameter features.intercom.headset_prior.enable <y0000000000xx>.cfg
Description
It configures the channel mode to use when receiving an incoming intercom call.
Note: It is not applicable to CP960 phones.
Permitted
Values
0-Speaker Mode
1-Headset Mode, it works only if you connect the headset to the IP phone and the headset mode is activ-
ated for use.
Default 1

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English