Yealink T5 Series

Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
368
Default Blank
Web UI Features->Action URL->Reject Incoming Call
Parameter action_url.answer_new_incoming_call <y0000000000xx>.cfg
Description
It configures the action URL the IP phone sends when answering a new incoming call.
Example:
action_url.answer_new_incoming_call = http://192.168.0.20/help.xml?IP=$ip
Permitted
Values
URL within 511 characters
The value format is: http(s)://IP address of server/help.xml?variable name=variable value. For predefined
events, refer to Predefined Events List. For variable value, refer to Variable Values List.
Default Blank
Web UI Features->Action URL->Answer New Incoming Call
Parameter action_url.transfer_finished <y0000000000xx>.cfg
Description
It configures the action URL the IP phone sends when completing a call transfer.
Example:
action_url.transfer_finished = http://192.168.0.20/help.xml?IP=$ip
Permitted
Values
URL within 511 characters
The value format is: http(s)://IP address of server/help.xml?variable name=variable value. For predefined
events, refer to Predefined Events List. For variable value, refer to Variable Values List.
Default Blank
Web UI Features->Action URL->Transfer Finished
Parameter action_url.transfer_failed <y0000000000xx>.cfg
Description
It configures the action URL the IP phone sends when failing to transfer a call.
Example:
action_url.transfer_failed = http://192.168.0.20/help.xml?IP=$ip
Permitted
Values
URL within 511 characters
The value format is: http(s)://IP address of server/help.xml?variable name=variable value. For predefined
events, refer to Predefined Events List. For variable value, refer to Variable Values List.
Default Blank
Web UI Features->Action URL->Transfer Failed
Parameter action_url.setup_autop_finish <y0000000000xx>.cfg
Description
It configures the action URL the IP phone sends when completing auto provisioning via power on.
Example:
action_url.setup_autop_finish = http://192.168.0.20/help.xml?IP=$ip
Permitted
Values
URL within 511 characters
The value format is: http(s)://IP address of server/help.xml?variable name=variable value. For predefined
events, refer to Predefined Events List. For variable value, refer to Variable Values List.