Yealink T5 Series Administrator's Guide

Advanced Features
373
Variable Value Phone Action
L1-LX Tap the line keys (X=27).
MSG Press the MESSAGE key. (not applicable to CP960 phones)
HEADSET Press the HEADSET key. (not applicable to CP960 phones)
RD Redial the last dialed number (not applicable to CP960 phones).
Reboot Reboot the phone.
AutoP Perform auto provisioning.
DNDOn
Activate the DND feature.
Note: For Yealink phones, it works only if “features.dnd.allow” is
set to 1 (Enabled).
DNDOff
Deactivate the DND feature.
Note: For Yealink phones, it works only if “features.dnd.allow” is
set to 1 (Enabled).
number=xxx&outgoing_uri=y
Place a call to xxx from SIP URI y.
Example: http://10.3.20.10/servlet?key=number=1234&outgoing_
uri=1006@10.2.1.48 (1234 means the number you dial out;
1006@10.2.1.48 means the SIP URL you dial from.)
OFFHOOK Pick up the handset. (not applicable to CP960 phones)
ONHOOK Hang up the handset (not applicable to CP960 phones).
ANSWER/ASW/Asw Answer a call.
Reset Reset a phone.
ATrans=xxx Perform a semi-attended/attended transfer to xxx.
BTrans=xxx Perform a blind transfer to xxx.
phonecfg=get[&accounts=x][&dnd=x][&fw=x]
Get firmware version, registration, DND or forward configuration
information.
The valid value of “x” is 0 or 1, 0 means you do not need to get
configuration information. 1 means you want to get con-
figuration information.
Note: The valid URI is: http(s)://<-
phoneIPAddress>/servlet?phonecfg=get[&accounts=x]
[&dnd=x][&fw=x]
Example:
http://10.3.20.10/servlet?phonecfg=get[&accounts=1][&dnd=0]
[&fw=1]
CallWaitingOn Activate the call waiting feature.

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English