Yealink T5 Series Administrator's Guide

Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
378
Values
Default 30
Parameter
account.X.subscribe_mwi_to_vm
[1]
<MAC>.cfg
Description
It enables or disables the phone to subscribe the message waiting indicator to the voice mail number.
Note: It works only if “account.X.subscribe_mwi” is set to 1 (Enabled) and “voice_mail.number.X” is con-
figured.
Permitted
Values
0-Disabled, the phone will subscribe the message waiting indicator to a specific account.
1-Enabled
Default 0
Web UI Account->Advanced->Subscribe MWI To Voice Mail
Parameter
voice_mail.number.X
[1]
<MAC>.cfg
Description It configures the voice mail number.
Permitted
Values
String within 99 characters
Default Blank
Web UI Account->Advanced->Voice Mail
Phone UI Message->Voice Mail->Set Voice Mail->AccountX No.
Parameter
account.X.display_mwi.enable
[1]
<MAC>.cfg
Description
It enables or disables the MWI alert to indicate that you have an unread voicemail message.
Note: It always works at the time of Unsolicited MWI; at the time of solicited MWI, MWI subscription fea-
ture should be configured in advance. To present audio MWI, you also need to set "features.voice_mail_
tone_enable" to 1 (Enabled) in advance.
Permitted
Values
0-Disabled,
1-Enabled, the View Voice Mail menu displays a message summary with counts. If “features.voice_mail_
tone_enable” and “phone_setting.mail_power_led_flash_enable” are set to 1 (Enabled), users receive a
visual and audio alert when they have new voicemail messages available on their phone.
Default 1
Web UI Account->Advanced->Voice Mail Display
Parameter features.voice_mail_alert.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to pop up the message when receiving the same amount of new voice-
mails.
Permitted
Values
0-Disabled
1-Enabled
Default 0
[1]
X is the account ID. For T58V/T58A/T56A, X=1-16; for CP960, X=1.

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English